3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

14
FIREWALL CONFIGURATION
COMMANDS
Firewall Configuration
Commands
default-login-user Syntax
default-login-user
undo default-login-user
View
Firewall system view
Parameter
None
Description
Use the default-login-user command to enable default Firewall login user
function.
Use the undo default-login-user command to disable default Firewall login user
function.
For login convenience, a user whose name and password are both SecBlade is
created in the Firewall module.
By default, the Firewall login user function is enabled. That is, the user created
internally in the Firewall module is allowed to log into the module.
n
This command is configured on the Firewall module.
Example
# Disable default Firewall module login user function.
[SecBlade_FW] undo default-login-user
display secblade module Syntax
display secblade module [sec-mod-name ]
View
Any view of the switch
Parameter
sec-mod-name: The module name.