3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

222 CHAPTER 15: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
Example
# Display the relevant information of all the local users.
<SecBlade_FW> display local-user
The contents of local user admin:
State: Active ServiceType Mask: T
Idle-cut: Disable
Access-limit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable
IP address: Disable
MAC address: Disable
User Privilege: 3
The contents of local user ftpuser:
State: Active ServiceType Mask: F
Idle-cut: Disable
Access-limit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable
IP address: Disable
MAC address: Disable
FTP Directory: flash:
Total 2 local user(s) Matched, 2 listed.
ServiceType Mask Meaning: A--PAD C--Terminal D--DVPN F--FTP P--PPP S--SSH
T-Telnet
domain Syntax
domain [ isp-name | default { disable | enable isp-name } ]
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. It comprises up to 24 characters,
excluding forward slashes (/), colons (:), asterisks (*), question marks (?), less-than
signs (<), and greater-than signs (>).
default: Configures the default ISP domain. The system-default ISP domain is
system.
Tabl e 212 Description on the fields of the display local-user command
Field Description
State User state (active/block)
ServiceType Mask Abbreviation for service type
Idle-cut Idle-cut switch
Access-Limit Limit of user connections
Current AccessNum Number of the current login users
Bind location Indicates if it is bound with the port
VLAN ID VLAN for the user
IP address User IP address
MAC address User MAC address
FTP Directory Directory authorized to FTP users
User Privilege User level