3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

RADIUS Protocol Configuration Commands 233
Example
# Send data flows and packets destined for the RADIUS server "3Com" in
kilobytes and kilo-packets.
[SecBlade_FW-radius-3com] data-flow-format data kilo-byte packet
kilo-packet
debugging local-server Syntax
debugging local-server { all | error | event | packet }
undo debugging local-server { all | error | event | packet }
View
User view
Parameter
all: All debugging.
error: Error debugging.
event: Event debugging.
packet: Packet debugging.
Description
Use the debugging local-server command to enable the debugging for the local
RADIUS authentication server.
Use the undo debugging local-server command to disable the debugging for
the local RADIUS authentication server.
By default, the debugging for the local RADIUS authentication server is disabled.
Example
# Enable the debugging for the local RADIUS authentication server.
[SecBlade_FW] debugging local-server all
*0.9045238 3Com LS/8/EVENT-MSG:Message received. MessageType = 1
*0.9045238 3Com LS/8/PACKET:Packet Received,Code = 1
*0.9045239 3Com LS/8/PACKET:Packet Send auth pkt ,Code =
debugging radius Syntax
debugging radius packet
undo debugging radius packet
View
User view
Parameter
packet: Enables packet debugging.