3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

272 CHAPTER 15: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
when there are a large number of users (more than 1000, inclusive). The following
table recommends the ratio of minutes to the number of users.
By default, the real-time accounting interval is 12 minutes.
Related command: retry realtime-accounting and radius scheme.
Example
# Set the real-time accounting interval in the HWTACACS scheme "3com" to 51
minutes.
[SecBlade_FW-hwtacacs-3com] timer realtime-accounting 51
timer response-timeout Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS view
Parameter
seconds: Ranges from 1 to 300 seconds.
Description
Use the timer response-timeout command to set the response timeout timer of
the TACACS server.
Use the .undo timer response-timeout command to restore the default (five
seconds).
By default, the response timeout timer of the TACACS server is five seconds.
n
As the HWTACACS is based on TCP, either the server response timeout and or the
TCP timeout may cause disconnection to the TACACS server.
Related command: display hwtacacs.
Example
# Set the response timeout time of the TACACS server to 30 seconds.
[SecBlade_FW] hwtacacs scheme test1
[SecBlade_FW-hwtacacs-test1] timer response-timeout 30
Tabl e 218 Recommended ratio of minutes to the number of users
Number of users Real-time accounting interval (minute)
1 - 99 3
100 - 499 6
500 - 999 12
Š1000 Š15