3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

17
NAT CONFIGURATION COMMANDS
NAT Configuration
Commands
debugging nat Syntax
debugging nat { alg | event | packet } [ interface { interface-type
interface-number ]
undo debugging nat { alg | event | packet } [ interface interface-type
interface-number ]
View
User view
Parameter
alg: Enables the application level gateway NAT debugging information.
event: Enables NAT event debugging information.
packet: Enables NAT data packet debugging information.
interface: Enables NAT packet debugging for a special interface.
Description
Use the debugging nat command to enable the NAT debugging function.
Use the undo debugging nat command to disable the NAT debugging function.
Example
# Enable the NAT event debugging.
<SecBlade_FW> debugging nat event
display nat Syntax
display nat { address-group | aging-time | all | outbound | server | statistics |
session [ source { global global-addr | inside inside-addr } ]
View
Any view
Parameter
address-group: Displays the information of the address pool.