3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

300 CHAPTER 18: FIREWALL CONFIGURATION COMMANDS
Use the undo debugging firewall packet-filter command to disable the
debugging output.
By default, all the debugging for the firewall packet filtering is disabled.
Related command: display debugging.
Example
# Enable the debugging information about UDP packet filtering.
<SecBlade_FW> debugging firewall packet-filter udp
debugging firewall
packet-filter
fragments-inspect
events
Syntax
debugging firewall packet-filter fragments-inspect events
undo debugging firewall packet-filter fragments-inspect events
View
User view
Parameter
None
Description
Use the debugging firewall packet-filter fragments-inspect events
command to enable the debugging of fragments detection events.
Use the undo debugging firewall packet-filter fragments-inspect events
command to disable it.
By default, the debugging of fragments detection events is disabled.
Example
# Enable the debugging of fragments detection events.
<SecBlade_FW> debugging firewall packet-filter fragments-inspect events
display firewall
fragment
Syntax
display firewall fragment
View
Any view
Parameter
None
Description
Use the display firewall fragment command to display the fragment table of
the firewall.
Example
# Display the fragment table of the firewall.