3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

320 CHAPTER 18: FIREWALL CONFIGURATION COMMANDS
Blacklist Configuration
Commands
debugging firewall
blacklist
Syntax
debugging firewall blacklist { all | item | packet }
undo debugging firewall blacklist { all | item | packet }
View
User view
Parameter
all: Specifies to enable all debugging for blacklist.
item: Specifies to enable debugging for the changes of blacklist items.
packet: Specifies to enable debugging for blacklist items in packets.
Description
Use the debugging firewall blacklist command to enable debugging for
blacklist on the firewall.
Use the undo debugging firewall blacklist command to disable debugging for
blacklist on the firewall.
Any debugging for blacklist is disabled by default.
Related command: display debugging.
Example
# Enable all debugging for blacklist function.
<SecBlade_FW> debugging firewall blacklist all
display firewall blacklist Syntax
display firewall blacklist { enable | item [ sour-addr ]
View
Any view
Parameter
enable: Displays the operation of blacklist.
item sour-addr: Displays one specific entry (with the IP address sour-addr) or all of
the entries of blacklist.
Description
Use the display firewall blacklist command to view the running state and
entries of the blacklist on the firewall. You can view item information in the
blacklist by configuring the item keyword in the command. If no IP address is
specified, you can view the summary information of the current blacklist items.