3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

322 CHAPTER 18: FIREWALL CONFIGURATION COMMANDS
Example
# Add a blacklist item with IP address of 192.168.10.10 and timeout time of 100
minutes.
[SecBlade_FW] firewall blacklist item 192.168.10.10 timeout 100
# Enable the blacklist function.
[SecBlade_FW] firewall blacklist enable
MAC/IP Address
Binding Configuration
Commands
debugging firewall
mac-binding
Syntax
debugging firewall mac-binding { all | item | packet }
undo debugging firewall mac-binding { all | item | packet }
View
User view
Parameter
all: Enables all debugging.
item: Enables debugging for changes of address binding items.
packet: Enables debugging for address binding items in packets.
Description
Use the debugging firewall mac-binding command to enable debugging for
address binding on a firewall.
Use the undo debugging firewall mac-binding command to disable debugging
for address binding on a firewall.
Any debugging for address binding function is disabled by default.
Related command: display debugging.
Example
# Enable all debugging for address binding items.
<SecBlade_FW> debugging firewall mac-binding all
display firewall
mac-binding
Syntax
display firewall mac-binding { enable | item [ ip-addr ] [ statistic ] }
View
Any view