3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

MAC/IP Address Binding Configuration Commands 323
Parameter
enable: Displays the running state of address binding.
item: Displays address binding items.
ip-addr: Entries with the specified IP address.
statistic: Displays statistics on address binding.
Description
Use the display firewall mac-binding command to view the running state and
items of address binding on the firewall. You can view the information of address
binding items by configuring item [ ip-addr ] in the command. If no IP address is
specified, you can view the summary information of all the current address
binding items. You can view the verbose information of a specific address binding
item by configuring the corresponding IP address in the command. And you can
specify the enable keyword in the command to view the running state of address
binding.
Example
# Display the summary information of all address binding items.
<SecBlade_FW> display firewall mac-binding item
Firewall mac-binding items :
Current items:2
192.168.1.1 00e0-0f0c-1149
20.202.16.5 0adc-0e0f-23ed
# Display the verbose information of a specific address binding item.
<SecBlade_FW> display firewall mac-binding item 192.168.1.1
Firewall mac-binding items :
192.168.1.1 00e0-0f0c-1149
# Display the running state of address binding.
<SecBlade_FW> display firewall mac-binding enable
Mac-binding is Disabled
# Display the statistics on address binding.
<SecBlade_FW> display firewall mac-binding item statistic
Firewall Mac-binding item(s) :
IP Address Mac True Pkts False Pkts
192.168.1.2 000f-1f73-fec5 0 57
firewall mac-binding Syntax
firewall mac-binding { enable | ip-addr mac-addr }
undo firewall mac-binding { enable | ip-addr }
View
System view