3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

324 CHAPTER 18: FIREWALL CONFIGURATION COMMANDS
Parameter
enable: Enables address binding.
ip-addr: Specifies an IP address of an address binding pair.
mac-addr: Specifies a MAC address of an address binding pair.
Description
Use the firewall mac-binding command to enable address binding and add an
address binding entry.
Use the undo firewall mac-binding command to disable address binding or
delete an address binding entry.
Example
# Add an address binding item with IP address of 192.168.10.10 and MAC
address of 00e0-0000-0001.
[SecBlade_FW] firewall mac-binding 192.168.10.10 00e0-0000-0001
# Enable address binding.
[SecBlade_FW] firewall blacklist enable
firewall mac-binding
enable
Syntax
firewall mac-binding enable
undo firewall mac-binding enable
View
System view
Parameter
enable: Enables the address binding function.
Description
Use the firewall mac-binding enable command to enable the MAC address
binding function.
Use the command to disable the MAC address binding function.
Example
# Enable the MAC address binding function.
[SecBlade_FW] firewall mac-binding enable
reset firewall
mac-binding
Syntax
reset firewall mac-binding item [ ip-addr ] statistic
View
User view