3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

Transparent Firewall Configuration Commands 333
*0.11355193 3Com FWTP/8/snd_ip:Send an IP packet
interface: GigabitEthernet0/0
source_ip_addr : 192.168.3.8
source_port : 0
destination_ip_addr : 192.168.3.6
destination_port : 1
protocol : 1
display firewall
ethernet-frame-filter
Syntax
display firewall ethernet-frame-filter { all | interface interface-type
interface-number }
View
Any view
Parameter
all: Ethernet frame filtering statistics on all interfaces.
interface interface-type interface-number: Ethernet frame filtering statistics on a
specified interface.
Description
Use the display firewall ethernet-frame-filter command to display Ethernet
frame filtering statistics.
Example
# Display Ethernet frame filtering statistics on all interfaces.
<SecBlade_FW> display firewall ethernet-frame-filter all
Interface: GigabitEthernet0/1
In-bound Policy: acl 4000
From 2099-08-02 5:55:05 to 2099-08-02 5:55:41
11 packets, 668 bytes, 100% permitted,
0 packets, 0 bytes, 0% denied,
0 packets, 0 bytes, 0% permitted default,
0 packets, 0 bytes, 0% denied default,
Totally 11 packets, 668 bytes, 100% permitted,
Totally 0 packets, 0 bytes, 0% denied.
Out-bound Policy: acl 4000
From 2099-08-02 5:55:07 to 2099-08-02 5:55:41
0 packets, 0 bytes, 0% permitted,
0 packets, 0 bytes, 0% denied,
0 packets, 0 bytes, 0% permitted default,
0 packets, 0 bytes, 100% denied default,
Totally 0 packets, 0 bytes, 0% permitted,
Totally 0 packets, 0 bytes, 100% denied.
display firewall mode Syntax
display firewall mode
View
Any view