3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

334 CHAPTER 19: TRANSPARENT FIREWALL CONFIGURATION COMMANDS
Parameter
None
Description
Use the display firewall mode command to display the operating mode of the
current firewall.
Example
# Display the operating mode of the current firewall.
<SecBlade_FW> display firewall mode
Firewall mode: transparent
display firewall
transparent-mode
address-table
Syntax
display firewall transparent-mode address-table [ interface interface-type
interface-number | mac mac-address ]
View
Any view
Parameter
interface interface-type interface-number: Information about the MAC address
associated the specified interface.
mac mac-address: Information about the specified MAC address entry.
Description
Use the display firewall transparent-mode address-table command to display
the MAC address table of the transparent firewall.
Example
# Display the MAC address table of the transparent firewall.
<SecBlade_FW> display firewall transparent-mode address-table
The total of the address-items is 2
Mac-address Flag Aging-time Receive Send Interface-name
00e0-fc36-a7a9 PD 00:01:41 23 13 GigabitEthernet0/0.1
000f-1f7e-fec5 PD 00:03:28 121 12 GigabitEthernet0/0.2
Flag meaning: P--PERMIT N--DENY D--DYNAMIC S--STATIC
display firewall
transparent-mode
config
Syntax
display firewall transparent-mode config
View
Any view
Parameter
None
Description
Use the display firewall transparent-mode config command to display the
configuration information of the transparent firewall.