3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

20
VRRP CONFIGURATION COMMANDS
n
The commands described in this document apply to the Firewall module, and not
to the Switch 8800 Family switches.
VRRP Configuration
Commands
n
You can also use the following commands with SecBlade_VPN prompt character.
debugging vrrp Syntax
debugging vrrp { packet | state }
undo debugging vrrp { packet | state }
View
User view
Parameter
packet: Enables VRRP packet debugging.
state: Enables VRRP state debugging.
Description
Use the debugging vrrp command to enable VRRP debugging.
Use the undo debugging vrrp command to disable VRRP debugging.
By default, VRRP debugging is disabled.
Example
# Enable VRRP packet debugging.
[SecBlade_FW] debugging vrrp packet
display vrrp Syntax
display vrrp [ interface type number [ virtual-router-ID ] ]
View
Any view