3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

Displaying Information about the IPsec module 15
Configuring Default
Login User Function
For login convenience, a user whose name and password are both secblade is
created in the IPsec module. You can use this user name and password to log into
the IPsec module.
Perform the following configuration in IPsec module system view.
By default, default login user function is enabled. That is, the user created in the
IPsec module is allowed to log into the IPsec module.
Displaying
Information about the
IPsec module
After the above configuration, execute the following command in any view to
display information about the IPsec module to verity the effect of the
configuration.
Tab le 7 Log into the IPsec module
Operation Command
Log into the IPsec module secblade slot slot-number
Tab le 8 Configure default login user function
Operation Command
Enable default login user function default-login-user
Disable default login user function undo default-login-user
Tab le 9 Display information about the IPsec module
Operation Command
Display information about the IPsec module display secblade [sec-mod-name ]