3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

166 CHAPTER 10: IPSEC CONFIGURATION
Deleting SA on encryption card
Use this command to clear the established SAs (either manually or through IKE
negotiation) of the encryption cards on the security gateway.
Perform the following configuration in user view.
n
Currently this command is not supported on the encryption card.
Clearing packet statistics on encryption card
You can reset all counters on the encryption card, including those for data
packets, byte counting, lost packets, failed authentication, faulty SAs, invalid SA
proposals, invalid protocols, and so on.
Perform the following configuration in user view.
n
Currently this command is not supported on the encryption card.
Clearing system log on encryption card
You can clear the system log, which records all key operations to it, on the
encryption card.
Perform the following configuration in user view.
n
Currently this command is not supported on the encryption card.
Clearing the fast forwarding information on encryption card
Perform the following configuration in user view.
Tabl e 162 Delete SA
Operation Command
Delete SAs on the encryption cared reset encrypt-card sa slot-id
Tabl e 163 Clear packet statistics on encryption card
Operation Command
Clear packet statistics on encryption card reset encrypt-card statistics slot-id
Tabl e 164 Clear system log on encryption card
Operation Command
Clear system log on encryption card reset encrypt-card syslog slot-id
Tabl e 165 Clear the fast forwarding information on encryption card
Operation Command
Clear the fast forwarding information on the
encryption card
reset encrypt-card fast-switch