3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

DVPN Configuration 219
A client does not authenticate a DVPN server by default.
A DVPN server is not configured with a pre-shared-key by default.
Configuring the user name and password for a client
User names and passwords are used when clients register with DVPN servers. You
must configure the user name and password in a DVPN class view for a client if it
is to register with a DVPN server that authenticates registering clients.
Perform the following configuration in a DVPN class view.
A client is not configured with a user name and password by default.
Configuring a DVPN
policy
Parameters about DVPN policy, such as session algorithm, IPsec algorithm for data,
time parameters, are configured in DVPN policy views. A DVPN server issues DVPN
policies applied in the DVPN domain to clients that successfully register with it.
Creating a DVPN policy view
You can create and enter a DVPN policy view, or remove an existing DVPN policy
by performing the following operations. To remove a DVPN policy that is applied in
a DVPN domain, you must disable it first.
Perform the following configuration in system view.
No DVPN policy is configured by default.
Specify not to authenticate the DVPN server authentication-server method none
Tab le 236 Configure a pre-shared-key for a DVPN server
Operation Command
Configure a pre-shared-key for a DVPN server pre-shared-key key
Remove the configured pre-shared-key undo pre-shared-key
Tab le 237 Configure the user name and password for a client
Operation Command
Configure the user name and password for a
client
local-user username password { simple |
cipher } password
Remove the user name and password of a
client
undo local-user username
Table 235 Specify how the client authenticates the DVPN server
Operation Command
Tab le 238 Create a DVPN policy view
Operation Command
Create a DVPN policy view and enter its view dvpn policy dvpn-policy-name
Remove a DVPN policy undo dvpn policy dvpn-policy-name