3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

228 CHAPTER 13: DVPN

[secblade_Clnt2-GigabitEthernet0/0.1] ip address 40.0.0.254 24

[secblade_Clnt2-GigabitEthernet0/0.1] quit

[secblade_Clnt2] interface g0/0.2

[secblade_Clnt2-GigabitEthernet0/0.2] vlan-type dot1q vid 60

[secblade_Clnt2-GigabitEthernet0/0.2] ip address 60.0.0.254 24

[secblade_Clnt2-GigabitEthernet0/0.2] quit

# Configure a static route.

[secblade_Clnt2] ip route-static 20.0.0.0 24 40.0.0.1

# Enable DVPN function.

[secblade_Clnt2] dvpn service enable

# Configure dvpn-class.

[secblade_Clnt2] dvpn class testserver

[secblade_Clnt2-dvpn-class-testserver] public-ip 90.0.0.254

[secblade_Clnt2-dvpn-class-testserver] quit

# Configure attribute for interface Tunnel 0.

[secblade_Clnt2] interface tunnel 0

[secblade_Clnt2-Tunnel0] ip address 192.168.0.2 255.255.255.0

[secblade_Clnt2-Tunnel0] tunnel-protocol udp dvpn

[secblade_Clnt2-Tunnel0] source GigabitEthernet0/0.2

[secblade_Clnt2-Tunnel0] dvpn interface-type client

[secblade_Clnt2-Tunnel0] dvpn server testserver

[secblade_Clnt2-Tunnel0] dvpn dvpn-id 1

[secblade_Clnt2-Tunnel0] quit

# Configure the static route.

[secblade_Clnt2] ip route-static 70.0.0.0 255.255.255.0 192.168.0.254

[secblade_Clnt2] ip route-static 10.0.0.0 255.255.255.0 192.168.0.1