3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

VRRP Configuration Examples 241
[secblade_B] quit
<secblade_B> quit
[Switch 8807_B]
VRRP Single Standby
Group Example 2
Network requirements
The VRRP standby group consisting of SecBlade_A and SecBlade_B serves as the
default gateway of hosts in VLAN 10. Hosts in Vlan10 access the Internet through
their gateway.
About the VRRP standby group: the standby group number is 1; the virtual IP
address is 10.0.0.254; SecBlade_A functions as the Master, while SecBlade_B as
the Backup. Preemption is enabled.
Network diagram
Figure 50 Network diagram for VRRP configuration
Network procedure
1 PC A
IP address: 10.0.0.50/24.
Gateway address: 10.0.0.254 (the virtual IP address of the standby group)
2 PC B
IP address: 10.0.0.60/24.
Vlan 50
SecBlade_A
_
Vlan 50
Vlan 50
Vlan 10
50.0.0.1/24
10.0.0.1/24
SecBlade_B
_
Vlan 50
Vlan 10
Vlan 10
50.0.0.2/24
2
The Internet
10.0.0.2/24
Vlan 10
Trunk
Virtual IP address
10.0.0.254/24
PC A PC B
S8800_B
S8800_A