3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

16
IPSEC MODULE CONFIGURATION
COMMANDS
IPsecModule
Configuration
Commands
default-login-user Syntax
default-login-user
undo default-login-user
View
SecBlade system view
Parameter
None
Description
Use the default-login-user command to enable default SecBlade login user
function.
Use the undo default-login-user command to disable default SecBlade login
user function.
For login convenience, a user whose name and password are both SecBlade is
created in the SecBlade.
By default, default SecBlade login user function is enabled. That is, the user
created internally in the SecBlade is allowed to log into the SecBlade.
n
This command is configured on the SecBlade card.
Example
# Disable default SecBlade login user function.
[SecBlade_FW] undo default-login-user
display secblade module Syntax
display secblade module [sec-mod-name ]
View
Any view of the switch