3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

17
AAA/RADIUS/HWTACACS
CONFIGURATION COMMANDS
n
All the contents below are about SecBlade cards, so the views of the commands in
this manual are the views corresponding to SecBlade cards instead of the Switch
8800 Family switches.
AAA Configuration
Commands
access-limit Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the
current ISP domain, ranging from 1 to 1048.
Description
Use the access-limit command to configure a limit to the amount of supplicants
in the current ISP domain.
Use the undo access-limit command to restore the limit to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP
domain. The supplicants may compete for the network resources. So setting a
suitable limit to the amount will guarantee the reliable performance to the existing
supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain 3com163.net.
[SecBlade_FW-isp-3com163.net] access-limit enable 500
accounting Syntax
accounting { hwtacacs-scheme hwtacacs-scheme-name | radius-scheme
radius-scheme-name | none }