3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

AAA Configuration Commands 257
Description
Use the accounting optional command to enable optional accounting.
Use the undo accounting optional command to disable it.
By default, optional accounting is disabled.
With the accounting optional command, a user that will be disconnected
otherwise can use the network resources even when there is no available
accounting server or the communication with the current accounting server fails.
This command is normally used for the authentication without accounting.
Example
# Enable optional accounting for users in the domain 3com163.net.
[SecBlade_FW] domain 3com163.net
[SecBlade_FW-isp-3com163.net] accounting optional
authentication Syntax
authentication { hwtacacs-scheme hwtacacs-scheme-name [ local ] |
radius-scheme radius-scheme-name [ local ] | local | none }
undo authentication
View
ISP domain view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Specifies the HWTACACS scheme
adopted for authentication.
radius-scheme radius-scheme-name: Specifies the RADIUS scheme adopted for
authentication.
local: Local authentication scheme.
none: Indicates that no authentication scheme is adopted.
Description
Use the authentication command to configure the authentication scheme
adopted by the current ISP domain.
Use the undo authentication command to restore the default authentication
scheme.
By default, the local authentication scheme is adopted.
The adopted RADIUS/HWTACACS scheme which is specified by the
authentication command for the current ISP domain must have been configured
already.