3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

260 CHAPTER 17: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
Description
Use the display connection command to view the relevant information on the
specified user connection or all the connections. The output can help you
troubleshoot user connections.
By default, information about all user connections is displayed.
Related command: cut connection.
Example
# Display information on the connections of the user system.
<SecBlade_FW> display connection domain system
Index=0 ,Username=hfx@system
IP=188.188.188.3
Total 1 connections matched, 1 listed.
display domain Syntax
display domain [ isp-name ]
View
Any view
Parameter
isp-name: Specifies the ISP domain name, with a string of up to 24 characters. The
specified ISP domain must be an existing one.
Description
Use the display domain command to view the configuration of a specified ISP
domain or display the summary information of all ISP domains.
If the domain name is not specified, the summary information of all ISP domains is
displayed.
This command is used to output the configuration of a specified ISP domain or
display the summary information of all ISP domains. If an ISP domain is specified,
the configuration information will be displayed exactly the same, concerning the
content and format, as the displayed information of the display domain
command. The output information can help with ISP domain diagnosis and
troubleshooting.
Related command: access-limit, domain, scheme, state, display domain.
Example
# Display the summaries of all ISP domains in the system.
Tabl e 256 Description on the fields of the display connection command
Field Description
Index Index number
Username User name
IP IP address of the user