3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

274 CHAPTER 17: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
Description
Use the debugging radius command to enable RADIUS debugging.
Use the undo debugging radius command to disable RADIUS debugging.
By default, RADIUS debugging is disabled.
Example
# Enable RADIUS debugging.
<SecBlade_FW> debugging radius packet
display local-server
statistics
Syntax
display local-server statistics
View
All views
Parameter
None
Description
Use the display local-server statistics command to display the statistics of the
local RADIUS authentication server.
Related command: local-server.
Example
# Display the statistics of the local RADIUS authentication server.
<SecBlade_FW> display local-server statistics
The localserver packet statistics:
Receive: 82 Send: 61
Discard: 21 Receive Packet Error: 0
Auth Receive: 82 Auth Send: 61
Acct Receive: 0 Acct Send: 0
display radius Syntax
display radius [ radius-scheme-name ]
View
Any view
Parameter
radius-scheme-name: Specifies a RADIUS scheme with a string of up to 32
characters. If no scheme is specified, all RADIUS schemes are displayed.
Description
Use the display radius command to view the configuration information about
the specified or all RADIUS schemes or to view statistics about RADIUS.
By default, the configuration information about all RADIUS schemes is displayed.