3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

RADIUS Protocol Configuration Commands 275
Related command: radius scheme.
Example
# Display the configurations of all RADIUS schemes.
<SecBlade_FW> display radius
------------------------------------------------------------------
SchemeName = system Index=0 Type=3com
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= 3com
Acct Server Encryption Key= 3com
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =one packet
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
display radius statistics Syntax
display radius statistics
Tab le 259 Information about RADIUS server configuration
Field Description
SchemeName RADIUS scheme name
Index Index number of the RADIUS scheme
Type Type of the RADIUS scheme
Primary Auth IP/ Port/ State IP address/access port number/current state of the primary
authentication server
Primary Acct IP/ Port/ State IP address/access port number/current state of the primary
accounting server
Second Auth IP/ Port/ State IP address/access port number/current state of the secondary
authentication server
Second Acct IP/ Port/ State IP address/access port number/current state of the secondary
accounting server
Auth Server Encryption Key Shared key of the authentication server
Acct Server Encryption Key Shared key of the accounting server
TimeOutValue (seconds) Duration of the RADIUS server timeout timer
Permitted send realtime PKT
failed counts
The maximum number of realtime-accounting packet
transmission attempts
Retry sending times of
noresponse acct-stop-PKT
The maximum number of retries allowed when sending a
buffered stop-accounting packet
Quiet-interval(min) The interval for the primary server to resume the active state.
Username format Format of username
Data flow unit Unit of data flows
Packet unit Unit of packets