3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

276 CHAPTER 17: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
View
Any view
Parameter
None
Description
Use the display radius statistics command to view the statistics information on
RADIUS packets. The displayed packet information can help you troubleshoot
RADIUS faults.
Related command: radius scheme.
Example
# Display the statistics information on RADIUS packets.
<SecBlade_FW> display radius statistics
state statistic(total=1048):
DEAD=1047 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=1
AcctStop=0 OnLine=1 Stop=0
StateErr=0
Received and Sent packets statistic:
Sent PKT total :38 Received PKT total:2
Resend Times Resend total
1 12
2 12
Total 24
RADIUS received packets statistic:
Code= 2,Num=1 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=1 ,Err=0
Code=11,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request , Num=13 , Err=0 , Succ=13
EAP auth request , Num=0 , Err=0 , Succ=0
Account request , Num=1 , Err=0 , Succ=1
Account off request , Num=0 , Err=0 , Succ=0
PKT auth timeout , Num=36 , Err=12 , Succ=24
PKT acct_timeout , Num=0 , Err=0 , Succ=0
Realtime Account timer , Num=0 , Err=0 , Succ=0
PKT response , Num=2 , Err=0 , Succ=2
EAP reauth_request , Num=0 , Err=0 , Succ=0
PORTAL access , Num=0 , Err=0 , Succ=0
Update ack , Num=0 , Err=0 , Succ=0
PORTAL access ack , Num=0 , Err=0 , Succ=0
Session ctrl pkt , Num=0 , Err=0 , Succ=0
RADIUS sent messages statistic:
Auth accept , Num=0
Auth reject , Num=0
EAP auth replying , Num=0
Account success , Num=0
Account failure , Num=0
Cut req , Num=0
RecError_MSG_sum:0 SndMSG_Fail_sum :0
Timer_Err :0 Alloc_Mem_Err :0
State Mismatch :0 Other_Error :0