3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

RADIUS Protocol Configuration Commands 285
radius scheme Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Parameter
radius-scheme-name: RADIUS scheme name, a string of up to 32 characters.
Description
Use the radius scheme command to configure a RADIUS scheme and enter its
view.
Use the undo radius scheme command to delete the specified RADIUS scheme.
By default, the RADIUS scheme named system exists in the system, with all
attributes being the defaults that are not configurable. You can use the display
radius command to view the settings of the system scheme.
RADIUS protocol is configured scheme by scheme. Every RADIUS scheme must at
least specify IP address and UDP port number of RADIUS
authentication/authorization/accounting server and the parameters necessary for
the RADIUS client (a security gateway) to interact with the servers. You must first
create a RADIUS scheme and enter its view before you can perform RADIUS
protocol configurations.
A RADIUS scheme can be referenced by several ISP domains at the same time.
The undo radius scheme command can be used to delete any RADIUS scheme
except for the default one. Note that a RADIUS scheme currently being used by
any online users cannot be removed.
Related command: key, retry realtime-accounting, scheme, timer
realtime-accounting, stop-accounting-buffer enable, retry
stop-accounting, server-type, state, user-name-format, retry, display radius
and display radius statistics.
Example
# Create a RADIUS scheme named "3com" and enter its view.
[SecBlade_FW] radius scheme 3com
[SecBlade_FW-radius-3com]
radius nas-ip Syntax
radius nas-ip ip-address
undo radius nas-ip
View
System view