3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

294 CHAPTER 17: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
receiving a response or discards the packet when the number of transmission
retries reaches the configured limit.
Related command: reset stop-accounting-buffer, radius scheme, display
stop-accounting-buffer.
Example
# In the RADIUS scheme "3Com", enable the security gateway to buffer the
stop-accounting requests that have no responses.
[SecBlade_FW-radius-3com] stop-accounting-buffer enable
timer quiet Syntax
timer quiet minutes
undo timer quiet
View
RADIUS view
Parameter
minutes: Ranges from 1 to 255.
Description
Use the timer quiet command to set the duration that the primary server must
wait before it can resume the active state.
Use the undo timer quiet command to restore the default (five minutes).
By default, the primary server must wait five minutes before it can resume the
active state.
Related command: display radius.
Example
# Set the quiet timer for the primary server to ten minutes.
[SecBlade_FW] radius scheme test1
[SecBlade_FW-radius-test1] timer quiet 10
timer
realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
RADIUS view
Parameter
minutes: Real-time accounting interval, which is a multiple of 3 in the range 3 to
60 minutes.