3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

298 CHAPTER 17: AAA/RADIUS/HWTACACS CONFIGURATION COMMANDS
Use the undo data-flow-format command to restore the default.
By default, the data unit is byte and the data packet unit is one-packet.
Related command: display hwtacacs.
Example
# Set the unit of data flow destined for the HWTACACS server "3com" to be
kilo-byte and the data packet unit be kilo-packet.
[SecBlade_FW-hwtacacs-3com] data-flow-format data kilo-byte packet
kilo-packet
debugging hwtacacs Syntax
debugging hwtacacs { all | error | event | message | receive-packet |
send-packet }
undo debugging hwtacacs { all | error | event | message | receive-packet |
send-packet }
View
User view
Parameter
all: Specifies all HWTACACS debugging.
error: Specifies error debugging.
event: Specifies event debugging.
message: Specifies message debugging.
receive-packet: Specifies incoming packet debugging.
send-packet: Specifies outgoing packet debugging.
Description
Use the debugging hwtacacs command to enable HWTACACS debugging.
Use the undo debugging hwtacacs command to disable HWTACACS
debugging.
By default, HWTACACS debugging is disabled.
Example
# Enable the event debugging of HWTACACS.
<SecBlade_FW> debugging hwtacacs event
display hwtacacs Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]