3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

HWTACACS Configuration Commands 307
View
User view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Configures to delete the
stop-accounting requests from the buffer according to the specified HWTACACS
scheme name. The hwtacacs-scheme-name specifies the HWTACACS scheme
name with a string of up to 32 characters.
Description
Use the reset stop-accounting-buffer command to clear the stop-accounting
requests that have no response and are buffered on the security gateway.
Related command: stop-accounting-buffer enable, retry stop-accounting,
display stop-accounting-buffer.
Example
# Delete the buffered stop-accounting requests that are related to the HWTACACS
scheme "3com".
<SecBlade_FW> reset stop-accounting-buffer hwtacacs-scheme 3com
retry stop-accounting Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS view
Parameter
retry-times: The maximum number of real-time accounting request attempts. It is
in the range 1 to 300.
Description
Use the retry stop-accounting command to enable stop-accounting packet
retransmission and configure the maximum number of stop-accounting request
attempts.
Use the undo retry stop-accounting command to restore the default setting.
By default, stop-accounting packet retransmission is enabled and up to 100
packets are allowed to be transmitted for each request.
Related command: reset stop-accounting-buffer, hwtacacs scheme, and
display stop-accounting-buffer.
Example
# Enable stop-accounting packet retransmission and allow up to 50 packets to be
transmitted for each request.
[SecBlade_FW-hwtacacs-test] retry stop-accounting 50