3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

341
Description
Use the debugging l2tp command to enable L2TP debugging.
Use the undo debugging l2tp command to disable L2TP debugging.
Example
# Enable all L2TP debugging.
<SecBlade_VPN> debugging l2tp all
display l2tp session Syntax
display l2tp session
View
Any view
Parameter
None
Description
Use the display l2tp session command to view the current L2TP sessions.
The output information of the command facilitates the user to learn information
of the current L2TP sessions.
Related command: display l2tp tunnel.
Example
# Display current L2TP sessions.
<SecBlade_VPN> display l2tp session
LocalSID RemoteSID LocalTID IdleTimeLeft
1 1 2 600
Total session = 1
display l2tp tunnel Syntax
display l2tp tunnel
View
Any view
Parameter
None
Tab le 265 Description on the fields of the display l2tp session command
Field Description
Total session Number of sessions
LocalSID The number uniquely identifies the local session.
RemoteSID The number uniquely identifies the peer session.
LocalTID The local ID number of the tunnel
Idle-Time-Left The residual time before the session is disconnected due to timing out