3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

343
<SecBlade VPN> display l2tp user
User Name LocalSID RemoteSID LocalTID
w@h3c 1 1 2
Total user = 1
interface
virtual-template
Syntax
interface virtual-template virtual-template-number
undo interface virtual-template virtual-template-number
View
System view
Parameter
virtual-template-number: Number of a virtual template interface, an integer in the
range 0 to 1023.
Description
Use the interface virtual-template command to create a virtual template
interface.
Use the undo interface virtual-template command to delete the virtual
template interface.
By default, no virtual template interface is created.
Virtual template interfaces are mainly used to configure the operation parameters
for the virtual interfaces dynamically created by the security gateway, such as MP
interfaces (bundled logical interfaces) and L2TP logical interfaces.
Related command: allow l2tp.
Example
# Create virtual template interface 1 and enter its view.
[SecBlade VPN] interface virtual-template 1
l2tp enable Syntax
l2tp enable
undo l2tp enable
Tab le 267 Description on the fields of the display L2tp user command
Field Description
User Name User name
LocalSID Local identifier of the session
RemoteSID Remote identifier of the session
LocalTID Local identifier of the tunnel
Total user Total number of the users