3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

344 CHAPTER 20: L2TP CONFIGURATION COMMANDS
View
System view
Parameter
None
Description
Use the l2tp enable command to enable the L2TP function.
Use the undo l2tp enable command to disable the L2TP function.
By default, the L2TP function is disabled.
Related command: l2tp-group.
Example
# Enable the L2TP function on the security gateway.
[SecBlade VPN] l2tp enable
l2tp-auto-client enable Syntax
l2tp-auto-client enable
undo l2tp-auto-client enable
View
Virtual template interface view
Parameter
None
Description
Use the l2tp-auto-client enable command to enable the LAC client to set up
L2TP tunnel.
Use the undo l2tp-auto-client enable command to disable the LAC client to set
up L2TP tunnel.
Example
# Enter virtual template interface view.
[SecBlade VPN] interface virtual-template 1
# Enable the LAC client to set up L2TP tunnel.
[SecBlade VPN-Virtual-Template1] l2tp-auto-client enable
l2tp-group Syntax
l2tp-group group-number
undo l2tp-group group-number