3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

345
View
System view
Parameter
group-number: Number of L2TP group, an integer ranging from 1 to 1000.
Description
Use the l2tp-group command to create an L2TP group.
Use the undo l2tp-group command to delete the L2TP group.
By default, no L2TP group is created.
Deleting an L2TP group using the undo l2tp-group command will also delete its
all configuration information. (L2TP group 1 can be the default L2TP group).
Related command: allow l2tp and start l2tp.
Example
# Create L2TP group 2 and enter L2TP group 2 view.
[SecBlade VPN] l2tp-group 2
[SecBlade VPN-l2tp2]
l2tpmoreexam enable Syntax
l2tpmoreexam enable
undo l2tpmoreexam enable
View
System view
Parameter
None
Description
Use the command at the LNS side.
Use the l2tpmoreexam enable command to enable the L2TP multi-domain
function.
Use the undo l2tpmoreexam enable command to disable the L2TP
multi-domain function.
By default, the L2TP multi-domain function is disabled.
L2TP multi-domain services can be deployed only after you enable the L2TP
multi-domain function by using the l2tpmoreexam enable command.
Related command: l2tp enable.