3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

353
tunnel name Syntax
tunnel name name
undo tunnel name
View
L2TP group view
Parameter
name: Local name of the tunnel, a character string with the length ranging from 1
to 30.
Description
Use the tunnel name command to specify local name of a tunnel.
Use the undo tunnel name command to restore the local name to the default.
By default, local name is the name of the security gateway.
When creating an L2TP group, the system initiates local name into the name of
the security gateway.
Related command: sysname.
Example
# Set local name of the tunnel to itsme.
[SecBlade VPN-l2tp1] tunnel name itsme
tunnel password Syntax
tunnel password { simple | cipher } password
undo tunnel password
View
L2TP group view
Parameter
simple: Password in plain text.
cipher: Password in ciphertext.
password: Password used for tunnel authentication, a character string with the
length ranging from 1 to 16.
Description
Use the tunnel password command to specify a password for tunnel
authentication.
Use the undo l2tp tunnel password command to remove the tunnel
authentication password.