3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

IPsec Configuration Commands 367
[SecBlade_VPN] display ipsec policy
===========================================
IPsec Policy Group: "policy1"
Using interface: {GigabitEthernet0/0.1}
===========================================
-----------------------------
IPsec policy name: "policy1"
sequence number: 1
mode: isakmp
-----------------------------
security data flow : 3000
ike-peer name: ikepeer
perfect forward secrecy: DH group 1
proposal name: proposal1
IPsec sa local duration(time based): 3600 seconds
IPsec sa local duration(traffic based): 1843200 kilobytes
===========================================
IPsec Policy Group: "policy2"
Using interface: {GigabitEthernet0/0.2}
===========================================
-----------------------------
IPsec policy name: "policy2"
sequence number: 1
mode: manual
-----------------------------
security data flow : 3001
tunnel local address: 172.16.2.1
tunnel remote address: 172.16.2.2
proposal name: proposal2
inbound AH setting:
AH spi:
AH string-key:
AH authentication hex key:
inbound ESP setting:
ESP spi:
ESP string-key:
ESP encryption hex key:
ESP authentication hex key:
outbound AH setting:
AH spi:
AH string-key:
AH authentication hex key:
outbound ESP setting:
ESP spi:
ESP string-key:
ESP encryption hex key:
ESP authentication hex key: :
Tab le 271 Description on the fields of the display ipsec policy command
Field Description
IPsec policy name Name of the IPsec policy
Sequence number Sequence number of the IPsec policy
Mode Negotiation mode of the IPsec policy: isakmp or manual