3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

368 CHAPTER 22: IPSEC CONFIGURATION COMMANDS
display ipsec
policy-template
Syntax
display ipsec policy-template [ brief | name template-name [ seq-number ] ]
View
Any view
Parameter
Brief : Displays brief information about all the IPsec policy templates.
Name : Displays information of the IPsec policy template with the name
template-name and sequence number seq-number.
template-name: Name of an IPsec policy template.
seq-number: Sequence number of an IPsec policy template. If seq-number is not
specified, then the information about all the IPsec policy templates named
template-name is shown.
If no parameter is specified, then the detail information about all the IPsec policy
templates will be displayed. If name template-name has been specified but
seq-number has not, the information of the specified IPsec policy template group
will be listed out.
Description
Use the display ipsec policy-template command to view information about the
IPsec policy template.
Parameter brief is for showing brief information about all the IPsec policy
templates, whose display format is the brief format (see the following example). It
can display information on all the IPsec policy templates quickly. Brief information
includes: template name and sequence number, access control list, and remote
address.
security data flow access control list used by an IPsec policy
Ike-peer name Name of the referenced IKE peer
perfect forward secrecy The configuration of perfect forward secrecy (PFS)
proposal name Name of the proposal referenced in the IPsec policy
IPsec sa local duration(time based) Time-based duration of the IPsec SA
IPsec sa local duration(traffic based) Traffic-based duration of the IPsec SA
tunnel local address IP address of the local end of the tunnel
tunnel remote address IP address of the remote end of the tunnel
inbound AH setting The setting of inbound AH protocol
inbound ESP setting The setting of inbound ESP protocol
outbound AH setting The setting of outbound AH protocol
outbound ESP setting The setting of outbound ESP protocol
Table 271 Description on the fields of the display ipsec policy command
Field Description