3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

IPsec Configuration Commands 369
Any of the sub-commands can be used to display detail information of the IPsec
policy template.
Related command: ipsec policy-template.
Example
# View brief information about all the IPsec policy templates.
[SecBlade_VPN] display ipsec policy-template brief
Policy-template-Name acl Remote-Address
------------------------------------------------------
test-tplt300 2200
display ipsec proposal Syntax
display ipsec proposal [ proposal-name ]
View
Any view
Parameter
proposal-name: Name of the proposal.
Description
Use the display ipsec proposal command to view information about the
proposal.
If the name of the proposal is not specified, then information about all the
proposals will be shown.
Related command: ipsec proposal, display ipsec sa and display ipsec policy.
Example
# View all the proposals.
[SecBlade_VPN] display ipsec proposal
Ipsec proposal name: prop2
encapsulation mode: tunnel
transform: ah-new
ah protocol: authentication-algorithm sha1-hmac-96
Ipsec proposal name: prop1
encapsulation mode: transport
transform: esp-new
esp protocol: authentication-algorithm md5-hmac96, encryption des
Tab le 272 Brief information of IPsec policy template
Field Description
Policy-template-Name name, sequence number of an IPsec policy template
acl access control list used by an IPsec policy template
Remote Address remote IP address
Tab le 273 IPsec proposal information
Field Description
Ipsec proposal name name of the proposal