3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

400 CHAPTER 22: IPSEC CONFIGURATION COMMANDS
encrypt-card backuped Syntax
encrypt-card backuped
undo encrypt-card backuped
View
System view
Parameter
None
Description
Use the encrypt-card backuped command to enable backup function for
encryption card.
Use the undo encrypt-card backuped command to disable backup function for
encryption card.
For the IPsec SA implemented by the encryption card, if the card is normal, IPsec is
processed by the card. If the card fails, backup function is enabled on the card and
the selected encryption/authentication algorithms for the SA are supported by the
IPsec module on Comware platform, IPsec shall be implemented by the IPsec
module on Comware platform. In the event that the selected algorithms are not
supported by the IPsec module, the system drops packets.
Example
# Enable backup function for the encryption card.
[SecBlade_VPN] encrypt-card backuped
encrypt-card fast-switch Syntax
encrypt-card fast-switch
undo encrypt-card fast-switch
View
System view
Parameter
None
Description
Use the encrypt-card fast-switch command to enable the fast forwarding
function of encryption card.
Use the undo encrypt-card fast-switch command to disable the fast forwarding
function of encryption card.
By default, the fast forwarding function of the encryption card is disabled.
For the packets that have the same [SourIP, SourPort, DestIP, DestPort, Prot]
quintuple, the security gateway creates a fast forwarding entry when it receives