3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

Encryption Card Configuration Commands 401
the first packet. Then, the subsequent packets, rather than processed packet by
packet, are sent directly to the encryption card, where they are sent to the
destination after being encrypted or decrypted. This is how the fast forwarding
function of the encryption card expedites packet processing.
c
CAUTION: After the fast forwarding function is enabled on the encryption card,
no more ACL statistics will be performed on the packets fast-forwarded by the
encryption card.
Example
# Enable the fast forwarding function of the encryption card.
[SecBlade_VPN] encrypt-card fast-switch
interface encrypt Syntax
interface encrypt slot-id
View
System view
Parameter
slot-id: Slot ID of an encryption card, whose range depends on the number of slots
on the security gateway. It is in 3-dimentional format, for example, x/y/z, where x
stands for a slot number on the security gateway, y and z are constant 0 for
encryption cards.
Description
Use the interface encrypt command to enter an encryption card interface view.
In encryption card interface view, you only can the shutdown and undo
shutdown commands, respectively to shut down the encryption card or turn the
card up.
Example
# Enter the interface mode of the encryption card at slot 5/0/0.
[SecBlade_VPN] interface encrypt 5/0/0
[SecBlade_VPN-Encrypt5/0/0]
ipsec card-proposal Syntax
ipsec card-proposal proposal-name
undo ipsec card-proposal proposal-name
View
System view
Parameter
proposal-name: Name of the SA proposal for encryption card, a string up to 16
characters. It is not case-sensitive.