3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

Encryption Card Configuration Commands 403
Example
# Clear the statistics on the encryption card on the slot 5/0/0.
<SecBlade_VPN> reset counters interface encrypt-card 5/0/0
reset encrypt-card
fast-switch
Syntax
reset encrypt-card fast-switch
View
User view
Parameter
None
Description
Use the reset encrypt-card fast-switch command to clear the fast forwarding
information on the encryption card.
Example
# Clear the fast forwarding information on the encryption card.
<SecBlade_VPN> reset encrypt-card fast-switch
reset encrypt-card sa Syntax
reset encrypt-card sa [ slot-id ]
View
User view
Parameter
slot-id: Slot ID of an encryption card, whose range depends on the number of slots
on the security gateway. It is in 3-dimentional format, for example, x/y/z, where x
stands for a slot number on the security gateway, y and z are constant 0 for
encryption cards.
Description
Use the reset encrypt-card sa command to clear the SAs on an encryption card.
You may need to clear the SA database information stored on the encryption card,
to output only the required information during debugging.
Related command: ipsec card-proposal.
n
This command is not available on the current encryption cards.
Example
# Clear the SAs on the encryption card on the slot 5/0/0.
<SecBlade_VPN> reset encrypt-card sa 5/0/0