3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

404 CHAPTER 22: IPSEC CONFIGURATION COMMANDS
reset encrypt-card
statistics
Syntax
reset encrypt-card statistics [ slot-id ]
View
User view
Parameter
slot-id: Slot ID of an encryption card, whose range depends on the number of slots
on the security gateway. It is in 3-dimentional format, for example, x/y/z, where x
stands for a slot number on the security gateway, y and z are constant 0 for
encryption cards.
Description
Use the reset encrypt-card statistics command to clear the processing statistics
of an encryption card.
The statistics record all the protocol processing information from the last
rebooting, including counts of incoming/outgoing ESP/AH packets, dropped
packets, failed authentications, erroneous SAs, invalid SA proposals, invalid
protocols.
n
This command is not available on the current encryption cards.
Example
# Clear the processing statistics on the encryption card on the slot 5/0/0.
<SecBlade_VPN> reset encrypt-card statistic 5/0/0
reset encrypt-card syslog Syntax
reset encrypt-card syslog [ slot-id ]
View
User view
Parameter
slot-id: Slot ID of an encryption card, whose range depends on the number of slots
on the security gateway. It is in 3-dimentional format, for example, x/y/z, where x
stands for a slot number on the security gateway, y and z are constant 0 for
encryption cards.
Description
Use the reset encrypt-card syslog command to clear all the logging information
on an encryption card.
The encryption card records all logging history information. And all the
information (including those obsolete items) shall be reported for every query,
which imposes somewhat difficulties to log monitoring and locating. Then you
may need to clear the log buffer of the encryption card.
n
This command is not available on the current encryption cards.