3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

416 CHAPTER 23: IKE CONFIGURATION COMMANDS
[SecBlade_VPN] ike peer new_peer
[SecBlade_VPN-ike-peer-new_peer]
ike peer Syntax
ike peer peer-name
undo ike peer peer-name
View
IPsec policy view, IPsec policy template view
Parameter
peer-name: IKE peer name, which is a string of up to 15 characters.
Description
Use the ike peer command to quote an IKE peer in an IPsec policy or IPsec policy
template.
Use the undo ike peer command to remove the quoted IKE peer from the IPsec
policy or IPsec policy template.
Related command: ipsec policy.
Example
# Quote an IKE peer in the IPsec policy.
[SecBlade_VPN-ipsec-policy-isakmp-policy-10] ike peer new_peer
ike proposal Syntax
ike proposal proposal-number
undo ike proposal proposal-number
View
System view
Parameter
proposal-number: IKE proposal number, ranging from 1 to 100. This value also
stands for the priority. A smaller value stands for a higher priority. When perform
an IKE negotiation, the system matches IKE proposals by the proposal number, the
one with the smallest proposal number first.
Description
Use the ike proposal command to define an IKE proposal.
Use the undo ike proposal command to delete an IKE proposal.
The system provides a default IKE proposal with the lowest priority.
Executing this command in system view will enter the IKE proposal view, where
you can set parameters such as authentication method, encryption algorithm,
authentication algorithm, DH group ID, and sa duration for this IKE proposal using