3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

PKI Domain Configuration Commands 427
certificate request mode Syntax
certificate request mode { manual | auto [ key-length key-length | password
{ simple | cipher } password ]* }
undo certificate request mode
View
PKI domain view
Parameter
manual: Applies for the certificate manually.
auto: Applies for the certificate automatically.
key-length: Length of the specified RSA key, in the range of 512 bits to 2,048 bits.
simple: Sets to display passwords in plain text.
cipher: Sets to display password in cipher text.
password: Password for revoking certificates, in range of 1 to 31 characters.
Description
Use the certificate request mode command to decide between the manual and
the auto request mode.
Use the undo certificate request mode command to restore the default request
mode.
Auto mode enables the auto delivery of certificate request when there is no
certificate or when the current certificate is about to expire. While manual mode
requires manual operation in the request process.
By default, certificate request is carried out manually.
Related command: pki request-certificate.
Example
# Set the request mode to Auto
[SecBlade_VPN-pki-domain-1] certificate request mode auto
certificate request
polling
Syntax
certificate request polling { interval minutes | count count }
undo certificate request polling { interval | count }
View
PKI domain view
Parameter
minutes: Interval between two polls in the range of five minutes to 60 minutes. It
is 20 minutes by default.