3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

PKI Displaying and Debugging Commands 453
Example
# Display information about all sessions in the DVPN domain with an ID of 2.
<SecBlade_VPN> display dvpn session dvpn-id 2
vpn-id private-ip public-ip port state type
-------------------------------------------------------------
2 11.0.0.2 211.1.1.2 9876 SUCCESS C->S
2 11.0.0.4 211.1.1.100 12289 SUCCESS C->C
display dvpn info Syntax
display dvpn info { dvpn-id dvpn-id | global }
View
Any view
Parameter
dvpn-id: ID of the DVPN domain ranging from 1 to 65535.
global: Specifies to display global configuration information about DVPN.
Description
Use the display dvpn info command to display configuration and runtime
information about a specified DVPN domain. Use the display dvpn info global
command to display global configuration and runtime information about DVPN.
Example
# Display information about the DVPN domain with an ID of 1.
[SecBlade_VPN] display dvpn info dvpn-id 1
---------------------------------------------------
DVPN Domain 1 Information
---------------------------------------------------
type : client
register type : Undistributed | Forward
session number : 1
server : server0
server state : active
server public IP : 211.1.1.2
algorithm suite : DES_MD5_DHGROUP1
session encryption flag : Need encryption
data encryption flag : Need encryption
authentication server method : none
session algorithm suite : AES128_SHA1_DHGROUP1
session setup time : 10
session idle time : 300
session keepalive time : 10
data algorithm suite : 3DES_MD5_DHGROUP2
data ipsecsa duration time : 180
data ipsecsa duration byte : 0
input packets : 17160
input dropped packets : 0