3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

PKI Displaying and Debugging Commands 457
Example
# Set the maximum retries for a client to register with a DVPN server continuously
to 6.
[SecBlade_VPN] dvpn client register-retry 6
dvpn dvpn-id Syntax
dvpn dvpn-id dvpn-id
undo dvpn dvpn-id
View
Tunnel interface views
Parameter
dvpn-id: ID of the DVPN domain ranging from 1 to 65535.
Description
Use the dvpn dvpn-id command to specify the DVPN domain the tunnel interface
belongs to. This command is valid when the tunnel interface is encapsulated as
DVPN.
Use the undo dvpn dvpn-id command to remove the DVPN domain ID assigned
to the tunnel interface.
No DVPN domain ID is assigned to a tunnel interface by default.
Related command: tunnel-protocol udp dvpn.
Example
# Specify the tunnel interface to belong to the DVPN domain with an ID of 100.
[SecBlade_VPN] interface tunnel 0
[SecBlade_VPN-Tunnel0] dvpn-protocol udp dvpn
[SecBlade_VPN-Tunnel0] dvpn dvpn-id 100
dvpn interface-type Syntax
dvpn interface-type { client | server }
undo dvpn interface-type
View
Tunnel interface views
Parameter
client: Specifies the tunnel interface to be of client type.
server: Specifies the tunnel interface to be of server type.
Description
Use the dvpn interface-type command to specify the type of a tunnel interface.