3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

458 CHAPTER 25: DVPN CONFIGURATION COMMANDS
Use the undo dvpn interface-type command to restore the default type of the
tunnel interface.
A tunnel interface is of client type by default.
Example
# Specify the tunnel interface to be of server type.
[SecBlade_VPN-Tunnel0] dvpn interface-type server
dvpn policy (system
view)
Syntax
dvpn policy dvpn-policy-name
undo dvpn policy dvpn-policy-name
View
System view
Parameter
dvpn-policy-name: Name of the DVPN policy to be created, a string with no more
than 31 characters in length.
Description
Use the dvpn policy command to create a DVPN policy and enter its view.
Use the undo dvpn policy command to remove a DVPN policy.
DVPN policies such as the way to authenticate clients, the encryption algorithm
suite used by sessions, the algorithm suite for forwarding packets, and time
settings are configured in DVPN policy views. If you want to remove a DVPN policy
that is applied to a tunnel interface, you must disable it first.
No DVPN policy is configured by default.
Example
# Create a DVPN policy named abc.
[SecBlade_VPN] dvpn policy abc
dvpn policy Syntax
dvpn policy dvpn-policy-name
undo dvpn policy dvpn-policy-name
View
Tunnel interface views
Parameter
policy-class-name: Name of the DVPN policy to be applied to the tunnel interface.
A DVPN policy is a data structure that contains information such as algorithms
used by sessions and time settings. You can use the dvpn policy command in
system view to create DVPN policies.