3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

464 CHAPTER 25: DVPN CONFIGURATION COMMANDS
View
System view
Parameter
None
Description
Use the dvpn service enable command to enable the DVPN feature on the
device.
Use the dvpn service disable command to disable DVPN feature on the device.
By default, the DVPN feature is enabled on the device.
Example
# Enable the DVPN feature.
[SecBlade_VPN] dvpn service enable
local-user Syntax
local-user username password { simple | cipher } password
undo local-user username
View
DVPN class views
Parameter
username: User name of the client, a string no more than 80 characters in length.
password: Password of the client.
simple: Specifies to display the password in plain text form.
cipher: Specifies to display the password in cipher text form.
Description
Use the local-user command to configure the user name and password of a
client.
Use the undo local-user command to remove the existing user name and
password.
Example
# Configure the user name and password of a client to user and test respectively.
and to display the password in plain text form..
[SecBlade_DVPN-class-abc] local-user user password simple test
public-ip Syntax
public-ip ip-address