3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

56 CHAPTER 4: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION

Configuring FTP/Telnet

User Local

Authentication

Configuring local authentication for FTP users is similar to that for Telnet users. The

following example is based on Telnet users.

Network requirements

Configure the IPsec module to authenticate the login Telnet users at the local (see

the following figure).

Network diagram

Figure 10 Network diagram for Telnet user local authentication

Configuration procedure

1 Telnet User

IP address: 10.0.0.1/24.

Gateway: 10.0.0.254.

2 Switch 8800 (SecBlade)

# Divide VLANs.

<SW8800> system-view

[SW8800] vlan 10

[3Com-vlan10] quit

[SW8800] vlan 30

[3Com-vlan30] quit

[SW8800] vlan 50

[3Com-vlan50] quit

# Configure the IP address.

Switch 8800