3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

AAA and RADIUS/HWTACACS Protocol Configuration Example 59

Network diagram

Figure 11 Network diagram for remote RADIUS authentication on the Telnet user

Configuration procedure

1 TACACS Server

IP address: 10.0.0.1/24.

Gateway: 10.0.0.254.

2 Telnet User

IP address: 50.0.0.1/24.

3 Switch 8800 (SecBlade)

# Divide VLANs.

<SW8800> system-view

[SW8800] vlan 10

[3Com-vlan10] quit

[SW8800] vlan 30

[3Com-vlan30] quit

[SW8800] vlan 50

[3Com-vlan50] quit

# Configure the IP address.

[SW8800] interface vlan-interface 10

[3Com-Vlan-interface10] ip address 10.0.0.254 24

[3Com-Vlan-interface10] quit

[SW8800] interface vlan-interface 30

[3Com-Vlan-interface30] ip address 30.0.0.1 24

[3Com-Vlan-interface30] quit

# Configure the static route.

IPsec

Switch 8800