3Com Switch 8800 Family IPsec Module Configuration and Command reference Guide

Displaying and Debugging ACL 79
Displaying and
Debugging ACL
After the above configuration, execute the display command in all views to
display the running of the ACL configuration, and to verify the effect of the
configuration. Execute the reset command in user view to rest ACL counters.
Typical Configuration
Examples of ACL
Refer to the typical configuration examples in the part about packet filtering
firewall.
Tab le 68 Configure time range
Operation Command
Create a time range
time-range time-name [ start-time to end-time ] [ days ] [ from
time1 date1 ] [ to time2 date2 ]
Delete a time range.
undo time-range time-name [ start-time to end-time ] [ days ] [
from time1 date1 ] [ to time2 date2 ]
Tab le 69 Display and debug ACL
Operation Command
Display the configured ACL rules. display acl { all | acl-number }
Display information on time ranges. display time-range { all | time-name }
Reset ACL counters. reset acl counter { all | acl-number }